EG4 BrightMount Adjustable Cat1 - Introduction; Packing List

4
Note: If the 4 panels width
exceeds 173.2 in. (4399.3 mm),
the end user can purchase the
rail extension kit to accommodate
the extra space required.
3. INTRODUCTION
The EG4
®
BrightMount Adjustable Cat1 is an innovative, heavy duty solar ground mount system
designed specifically for ground mounted solar panel arrays. Manufactured from anodized aluminum
alloy with stainless-steel hardware, this ground mount system is designed for the rigors of outdoor use.
Each BrightMount kit comes with everything needed to install up to 4 solar panels side-by-side. Five
preset angles allow for easy adjustment to get the most out of the system.
4. PACKING LIST
The following items are included with the BrightMount Adjustable Cat1. Before assembly and
installation, please inspect the contents to ensure no components were damaged in transit.
Bracing Rail Bases (×4)
35mm End
Clamp (×4)
Rail (×4)
Mid Clamp (×6)
Grounding Lug (×2)
M8*50 (×4)
M8*60 (×12)
30mm End
Clamp (×4)
40mm End
Clamp (×4)
Bonding Jumper (×2)
Cable Clip (×2)
Rail Extension
Sold Separately
Expansion Bolt (×16)
Bracing Rail (×4)
Rail Clamp (×8)
Rail Connector (×2)
Grounding Plate (×8)