What to do if my EG4 LL shows ALM LED always on?
If the ALM LED on your EG4 Battery Pack is always on, it indicates a short circuit. Disconnect the power cable and inspect all cables for damage or improper connections.
Why is my EG4 Battery Pack power supply unstable?
An unstable power supply in your EG4 Battery Pack may occur because the battery capacity is not at full power. Check the battery cable connection to ensure it is properly connected.
Technical specifications for the EG4 LL 12V 400AH battery module.
Technical specifications for the EG4 LL 24V 200AH battery module.
General safety guidelines for installation and operation of the battery.
Critical safety warnings and precautions for users and installers.
Important warnings and requirements before installing the battery.
Details on cable size, torque values, and tools for installation.
Specific steps for installing batteries within an EG4 rack.
Steps for connecting multiple batteries in parallel for communication.
General| Nominal Voltage | 51.2V |
|---|---|
| Nominal Capacity | 100Ah |
| Energy | 5.12 kWh |
| Max. Continuous Discharging Current | 100A |
| Warranty | 10 years |
| Cycle Life | 6000 cycles @ 80% DoD |
| Communication | CAN, RS485 |
| Scalability | Up to 16 in parallel |
| Operating Temperature | -4°F to 131°F (-20°C to 55°C) |
| Battery Type | LiFePO4 |
| Protection | High Temperature, Low Temperature, Short Circuit |
| C Rating | 1C |
To Next Page
