Egholm 2100 - Driving with Front-Mounted Attachments; Mounting Attachments

Stopping the Egholm 2100
A) Leave the control levers A, B, C and D in position "0".
B) Close the throttle and let the engine idle.
C) Fully depress the brake pedal (1) and push the
parking brake (2) forwards - refer to page 13.
D) Stop the engine by turning the ignition key back to
initial position.
Driving with front-mounted attachments
Raise the A-frame with possible attachment before
driving.
Raise the attachment by pushing lever A upwards into
pos. 1. Release lever A when the attachment has
reached the required height.
Don't forget to engage the transport lock (7) when driving
long distances - refer to page 10.
Lever A - Further functions
Push lever A into pos. "0" to lock the A-frame/
attachment.
Push lever A downwards into pos. 2 to lower the
A-frame/attachment.
Mounting front and rear-mounted
attachments
Please refer to the operator's manual for the individual
attachments.
Lever A, B, C
Lever D
A-frame
16
2. INSTRUCTIONS FOR USE
Basic operation
2
1
4
6
7
5
3
Right side
Left side