1.5 Control levers and pedals
Lever A:
Raising and lowering of A-frame:
Pos. 1 (upwards): Raises the A-frame.
Pos. 0 (neutral): Locks the A-frame in a given position.
Pos. 3 (downwards):Lowers the A-frame.
Lever B:
Activates the hydraulic couplings B1 and B2 - for
attachments:
Pos. 1 (upwards): The oil flow is activated = the
attachment is in operation.
Pos. 0 (neutral): Action depends on the
attachment.
Pos. 2 (downwards):Operates the attachment
in the opposite direction.
Lever C:
Activates the hydraulic couplings C1 and C2 for
rear-mounted attachments:
Pos. 1 (upwards): Raises the attachment.
Pos. 0 (neutral): Action depends on the attachment.
Lever D:
Starts the attachment. (Activates the hydraulic couplings
D1 and D2):
Pos. 1 (upwards): Activates the attachment.
Pos. 0 (neutral): Deactivates the attachment.
Pos. 2 (downwards): Operates the attachment in the
opposite direction.
Hydraulic coupling D3:
Flow connector for various attachments (female ¼")
Important!
KKeeeepp tthhee hhyyddrraauulliicc qquuiicckk ccoouupplliinnggss ffrreeee ffrroomm
ddiirrtt..
Activating attachments from
outside the cab - only for the remote vac
hose
A) Park the machine with the parking brake
lloocckkeedd..
B) Press the button for conscious activating of
attachments (*) while activating lever D.
A-frame for attachments
Bonnet lock Coupling C1 og C2
Coupling Lever D Contact (*)
D1,D2,D3
9
1. GENERAL INFORMATION
Machine left side
Machine left side
Levers Coupling Diesel
A, B, C B1 og B2
To Next Page
Loading...