Engine oil change
Change the engine oil after the first 50 hours of opera-
tion. Oil change is done easier when the engine is hot.
A) Unscrew the plug on the bottom of your oil pan to
drain the oil.
B) Let it drain completely and replace the plug.
C) Top up with new engine oil until the oil level
reaches the upper marking of the dipstick - approx.
2.7 l 15W/40 oil.
Engine oil filter change
A) Use a special oil filter wrench to remove the oil filter.
B) Lubricate the sealing surface of the new filter with
some oil.
C) Screw the new filter on by hand.
D) Do not use the oil filter wrench, as this will
overtighten the filter.
E) Start the engine and let it run a bit to check for any
leaks around the filter. If oil is leaking, tighten up the
filter some more.
F) Stop the engine and check the oil level.
G) Top up if necessary.
Remove the plug
Changing the oil filter
23
3. SERVICE AND MAINTENANCE
To Next Page
Loading...