EGi MILLENIUM - Control Console Advanced Functions - System Information; Checking Software Version; System Initialization

33.
13 Initialising the system
It is recommended to proceed with this operation
after the options described in points 1 and 6.
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is NEITHER a pre-recorded
message player (1103) NOR a module for sending
messages over the telephone (1104) in the
system:
MORE
START UP
YES
12 Checking the software version
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is NEITHER a pre-recorded
message player (1103) NOR a module for sending
messages over the telephone (1104) in the system:
MORE
SOFTWARE VERSION
If the general access password is active the system will require us to introduce it every time we try to operate one of
the advanced functions (see point 2 of “Access restrictions”).
1202
Control console. Advanced functions