EGO HT2400E - SAFETY SYMBOLS; Safety Alert Explanation; Symbol Meaning; Eye Protection

Tool List For Repair
4
NO. Tool List SPEC Remark
1 Magnetic bits
2 Hexagon Spline Screwdriver To remove the hexagon spline screw
3 Screwdriver
4 Torque Wrench
Rated torque should exceed
12 Nm
To tighten the blade bolt
5 Hex wrench M6
6 Electric Soldering Iron
To solder or separate the motor with
the PCB
7 Solder sucker
8 Heat shrinkable sleeves
9
Scissors To remove the shrinkable sleeve
10
Grease To lubricate the Blade