56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E18
TO INSTALL/REMOVE BATTERY PACK (Fig. 2 & 3)
WARNING:
Always remove the battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when not in use. Removing the
battery pack will prevent accidental starting that could cause serious personal injury.
NOTE: Fully charge the battery pack before rst use.
TO INSTALL (Fig. 2)
Align the ribs of the battery pack
with the mounting slots in the hedge
trimmer’s battery port.
Press the battery pack down until it
snaps into position.
NOTE: Make sure that the latch on the
hedge trimmer snaps into place and the
battery pack is secured to the tool before
beginning operation.
TO REMOVE (Fig. 3)
WARNING:
Always be aware for
the location of your feet, children, or pets
when pressing the battery-release button.
Serious injury could result if the battery
pack falls. NEVER remove the battery
pack at a high location.
Press the battery-release button,
the battery pack will disengage
from the latch.
Grasp the battery pack and remove
it from the hedge trimmer.
2
Press to Release
3
To Next Page
Loading...
Need help?
General
