56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC30
To update the rmware:
1. Tap on the mower icon in the app.
2. In the Status screen, if you see a green mark underneath the word “FIRMWARE”, your mower has the latest
version installed and no action is necessary. If you see a red “UPDATE!” button, tap on it to install the latest
rmware.
3. Follow the app’s instructions to complete the rmware update. This step will require you:
a. To NOT SIT on the mower’s seat.
b. To quickly press the “Start/Stop” button (or Power button) located next to the safety key on your mower to make
sure that the LCD screen is on.
c. To pull up the red PTO switch on the mower.
To Next Page
Loading...
