6556-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC
FAULT CODE & MOWER STATUS INDICATOR REFERENCE
LCD
Display
Description
Fault code
on LCD
Mower
Status
Indicator
Audio
Indicator
Cause Solution
Safety key icon blinks n/a OFF No
The safety key
is not inserted.
Insert the safety key then press and
hold the START/STOP button for more
than 3 seconds to turn on the mower.
Key Control
Panel Box
Assembly is
broken.
Have repairs performed by a qualied
service technician.
The icon of a certain bat-
tery compartment blinks
n/a n/a No
Due to only
have one fully
charged battery
pack and the
others are all
in low power,
the battery
box assembly
discharging
channel is in
the over-current
status.
Before the normal use, please charge
the batteries to ensure have two
fully charged batteries at least in the
battery box and the blink icon will
disappear.
The icon of the empty bat-
tery compartment blinks
n/a OFF No
Battery capacity
is not sufcient
to allow the ride
on mower to
work.
In order to start this mower, EGO
batteries totaling 15Ah (2 X BA4200/
BA4200T) or more are required. For
best performance, we recommend
use of EGO batteries that total 30Ah
or more.
The overload indicator
blinks
n/a Flashes red One beep
The blade motor
is overloaded.
Raise the deck cutting height or slow
the driving speed to reduce the load of
the mower.
The side
discharge chute
is clogged
with grass and
debris.
Clean the side discharge chute after
each use.
There is an
interference
between the
blade and the
mower deck.
Call EGO Customer Service Center
The icon of the thermom-
eter blinks.
n/a Flashes red One beep
The mower is
overheated.
Reduce the load of the mower by rais-
ing the deck cutting height or slowing
down the blade/driving speed. Take a
break and allow the mower to cool.
To Next Page
Loading...
Need help?
General
