56 VOLT LITHIUM-ION BRUSHLESS BIKE HANDLE LINE TRIMMER — BC1500E-F14
EN
PROBLEM CAUSE SOLUTION
Grass wraps around
trimmer head and
motor housing
◾ Cutting tall grass at ground
level.
◾ Cut tall grass from the top down, removing no more
than 20cm in each pass to prevent wrapping.
The blade is not
cutting the line.
◾ The line-cutting blade on the
edge of the guard has become
dull.
◾ Sharpen the line-cutting blade with a file or replace
it with a new blade.
Cracks on the
trimmer head or
the spool retainer
comes loose with
spool base.
◾ The trimmer head is worn out. ◾ Replace the trimmer head Immediately performed
by a qualified service technician.
During line re-
placement, the line
can’t be loaded into
the trimmer head
properly.
◾ Spool retainer’s LOAD lines do
not align with the eyelets in the
spool base.
◾ Rotate the spool retainer in the arrow direction to
align the LOAD lines on the spool retainer with the
eyelets in the spool base.
◾ The string line is not correctly
inserted into the mounting hole
in the eyelet.
◾ Align the LOAD lines with the eyelets first, then
insert the line into the mounting hole inside the
eyelet.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
To Next Page
Loading...
Need help?
General
