56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC36
MAINTENANCE
WARNING:
To avoid serious personal injury, remove the battery pack from the
chain saw before inspecting, cleaning, or performing maintenance. A battery-operated
tool with the battery pack inserted is always on and can start accidently.
WARNING:
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.
WARNING:
Always wear heavy gloves when doing any maintenance on the saw
chain. Be careful of the saw chain and protect your hands from being injured by the
saw chain.
WARNING:
When cleaning the chain saw, DO NOT immerse it in water or other
liquids.
WARNING:
Do not at any time let brake uids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
All chain saw service, other than the items listed in this manual, should be performed
by a qualied service technician.
CLEANING
◾
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the chain saw surface with a clean cloth moistened with a mild soap solution.
◾
For deep clearing, remove the side cover, take down the guide bar and saw chain
and then use a soft brush to thoroughly remove debris from the guide bar, saw
chain, and the drive sprocket on the chain saw power head.
◾
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
To Next Page
Loading...
Need help?
General
