to the unit before starting operation.
STARTING/STOPPING THE SNOW BLOWER
CAUTION: Do not attempt to override the operation of the safety button. Do not rapidly turn the snow blower off and
on.
WARNING: The operation of a snow blower can result in foreign objects being thrown into your or others’ eyes,
which can damage eyes severely. Always wear safety glasses while operating the snow blower or while performing
any adjustments or repairs on the snow blower.
WARNING: Ensure that other people and pets remain at least 100’ (30m) away from the snow blower when it is in
use.
WARNING: The auger will continue to rotate for a few seconds after the snow blower is turned off. Allow the auger to
stop rotating before starting it again.
To Start the Snow Blower
1. Ensure that the handle assembly is securely adjusted to appropriate height, the side-discharge chute assembly
is mounted properly, and the chute and chute deflector are adjusted to an appropriate position.
2. Attach the battery pack(s) to the snow blower and close the battery cover.
NOTICE: Make sure that the latch on the snow blower snaps into place and that the battery pack(s) are secured
to the snow blower before operation.
3. Press the safety button and hold for 1 second, and the LED indicator will blink green. Press the auger-switch
trigger to turn on the snow blower while the LED indicator blinks (Fig.13).
NOTICE: The snow blower can be turned on by the auger-switch-trigger only when the LED indicator blinks.
NOTICE: The snow blower may not properly start if its battery temperature is -4°F (-20°C) or less. If the snow
blower doesn’t start, remove the battery from the snow blower and allow it to warm indoors for 10 minutes or
To Next Page
Loading...
