EGO SNT2400 User Manual

the auger rotates. To stop the auger, release the self-propel trigger and both the auger and the self-propel function
will stop.
CHUTE AND DEFLECTOR ADJUSTMENT
The chute can be adjusted to change both the direction and the distance of the discharged snow to assist you in
moving snow away from one area and placing it in another. The direction of snow removal can be adjusted up to left
100° and right 100° (Fig.16).
1. Pull the chute-rotation handle to the left to rotate the chute to the left.
2. Pull the chute-rotation handle to the right to rotate the chute to the right. The throwing distance of the snow
blower is adjusted by moving the chute deflector up or down.
To increase or decrease the distance that the snow is thrown, pull the chute deflector handle backward or forward to
raise or lower the chute deflector(Fig.17). Once arriving at the desired chute deflector position, engage the chute

EGO SNT2400 Specifications

General

Stage Type	Two-stage
Clearing Width	24 inches
Battery Voltage	56 V
Auger Material	Steel
Drive System	Self-Propelled
Speed Control	Variable Speed
Intake Height	20 inches
Throwing Distance	50 feet
Number of Batteries	2
Chute Control	Remote
Speed Settings	Variable
Headlights	LED
Chute Rotation	200 degrees