To Next Page
J
Jesus CohenJul 28, 2025
Why is my EGO Snow Blower not starting?
- MMichael HoltJul 28, 2025
Several factors could prevent your EGO Snow Blower from starting: * The battery charge might be low, in which case you should charge the battery. * The auger-switch trigger may not be depressed when the LED indicator is flashing green. Press the auger switch trigger when the LED indicator blinks. Note that if the LED indicator stops blinking, the snow blower will not respond to the pressing of auger-switch trigger. * The auger could be frozen by snow or ice. Remove the battery pack(s), then use the supplied chute clean tool to clear any obstructing snow or ice from the auger before restarting the snow blower. * The battery might be overheated. Remove the battery and wait for it to cool down to approximately 152°F (67°C) before reinstalling it and restarting the snow blower.
General
