To Next PageTo Next Page
Need help?Do you have a question about the EGO ST1620T and is the answer not in the manual?
Explains safety alert symbols, general warnings, and eye protection requirements.
Indicates DANGER, WARNING, or CAUTION, used with other symbols or pictographs.
Keep work area clean, avoid explosive atmospheres, keep children and bystanders away.
Stay alert, use PPE, prevent unintentional starting, maintain footing and balance.
Recharge with specified charger, use correct battery packs, store properly, handle with care.
Use correct nylon line, avoid wire, replace damaged head/guard.
Check for abnormal operation, ensure guards are attached, avoid wet locations.
Congratulations, product design, and customer service contact info.
Advise recording serial number and date of purchase for future reference.
Details voltage, speed, cutting width, temperature, and weight.
Lists accessories and included items in the package.
Identifies key parts of the string trimmer with a diagram.
Describes adjustable front handle, variable trigger, lock-off switch, speed switch, indicator.
Explains the guard and the line-cutting blade for safety and performance.
Details height clamp, trimmer head, POWERLOAD, hinge, battery release, latch, and ejection.
Steps for removing and inspecting product and accessories from the box.
Lists approved uses like trimming grass and weeds around obstacles.
Instructions for installing and removing the battery pack.
Steps to start, stop, and control speed using the variable trigger.
Explains the 2-speed switch and indicator for low/high speeds.
Correct angle, not forcing, cutting height, and handling tall grass.
Advice on trimming near fences, walls, trees, and shrubs.
How to wind line using the POWERLOAD button.
Use 0.095 in. (2.4 mm) nylon line; avoid metal reinforced line.
Warning and instruction to replace cracked or damaged trimmer heads.
Steps to remove the spool assembly and bushing from the motor shaft.
Steps to mount the bushing and spool assembly with a nut.
Instructions for cleaning the trimmer with a damp cloth and mild detergent.
Steps to remove, sharpen, and replace the line-cutting blade.
Remove battery and clean tool before storing in a dry, ventilated area.
Lists causes like battery issues, lock-off switch, or bound shaft.
Causes include guard issue, heavy line, overheating, or disconnection.
Problems with line advancement due to bound shaft, line issues, or malfunction.
Cutting tall grass incorrectly can cause wrapping around head/motor.
Dull line-cutting blade requires sharpening or replacement.
Worn trimmer head needs immediate replacement.
Issues with winding line due to improper line, debris, motor heat, or low battery.
Cutting line is split or bent at the end, preventing insertion.
Details limited warranty periods for equipment, batteries, and chargers.
Covers defects in material/workmanship; details warranty for residential/commercial use.
Void conditions like rental, modification, misuse, abuse, and normal wear.
Contact customer service, present sales receipt, potential deposit for repair.
Disclaims implied warranties; limits liability for damages.
General
