Egret Pro - Controls, Acceleration, and Braking; Lights Control and Acceleration

55
Switching the lights
on and off
Switchingthelightson
To switch on the lights on the scooter,
press the ‘On/Off’ button (L) for approx.
0.5 seconds.
Switchingthelightso
To switch off the lights on the scooter,
press the ‘On/Off’ button (L) for approx.
0.5 seconds.
Accelerating
Slowly push the throttle (M) down with your thumb to accelerate.
The further you push the throttle, the more the scooter will accelerate.
The less you push it, the slower the acceleration will be.
To set the Egret moving, you need to push the scooter above 3 km/h. The motor assistance
does not switch on until you exceed this speed.
L
M
M
3 km/h