TI 017 from 30.07.2013
New coffee boiler and software
We are pleased to inform you, that the following modification has been introduced in the production
1. New coffee boiler with 2.5 kW heater
The new coffee boiler has a internal heating element. Because of that the power consumtion could be
reduced from 3.0 kW to 2.5 kW with the same performance. In addition, the water volume was
increased by 40%.
The brewing valve and the bypass valve was udapted to the new boiler.
The software was udapted and contains a new paramter. It will be adjusted in production.
Machine setup: Boiler Type: 2.5 kW.
Machines from serial no. FN 12006558 Pin 92434 on are equipped with the new coffee boiler.
It’s not possible to upgrade an old coffee machine with the new boiler because the frame has been
modified.
2. New Software ONE V3.05 for (Touch + Key pad)
Software Modification:
New parameter added for the heating management of the new coffee boiler
The backup-file contains now the software version of the coffee machine.
The new software can be downloaded in the document area on www.ranciliogroup-
customersupport.com
Important notice: Software V3.00 and higher cannot be downgraded
Machines with software Version V1.02 or older must be updated first to V 2.00, before you can upgrade
to V3.0x.
Please upgrade the SW according to the technical manual.
To Next Page
