a. Retrofit
There is no retrofit of the combined valve necessary, but you are requested to check the machines in
the field with the combined valve for leakages.
If there are some leakages in the area of the safety valve, please exchange the combined valve to a
safety valve and a vacuum valve. The exchange is described in a separate document, which is available
in the technical documentation area of the Egro ONE.
There is a retrofit-kit for the replacement available, which contains all parts and can be ordered with the
ID-number 101093.001.
3. Third way drain cup
The third way drain cup was added to the machines, to reduce the number of tubes and junctions in the
machines. This drain cup collects the condensate from the steam bar and the safety valve. With this
solution we offer you a machine with better access to the interior.
The third way drain cup is used from s/n 450351 on.
a. Retrofit
There is no retrofit necessary and no retrofit-kit will be offered. The third way drain cup will be available
in the spare part catalogue.
4. Spring for Grinder
The grinders of the Egro ONE are adjustable from outside from the customer. But not everywhere it
should be possible for the user to adjust the grinder in a wide range e.g. in self service zones.
To Next Page
