TI 002 from 30.06.2010
Modifications on Egro ONE
Due to the improvement of the new machine Egro ONE there are a number of modifications which we
like to inform you about.
1. Egro ONE SW Update
A new software version of the control board software is available. The version V1.01 with the release
date of 24.02.10 from the control board software was tested and used in production from mid of April
on.
Corrections were done on the configuration of the payment system, in the submission of the prices. The
software used for certain products the prices of the product which was the last delivered one.
Machines from s/n 450308 on are equipped with this software.
a. Retrofit
There is no update of the software necessary. An update is only requested in configurations working
with a payment system.
2. Safety valve
In the Egro ONE we started to use a new combined valve, which works as a safety valve and as the
vacuum valve.
Unfortunately we had some valves, which are leaking.
To secure for you the functionality of the valve, we decided to use two valves as we have it with the
other series and which is a proper working solution.
The two valves are mounted from s/n 450331 on.
To Next Page
Loading...
