4
Technical Specification
Power Supply
230V AC, 50Hz
Power Consumption
0.25W (standby)
Max Current Draw
60mA
Battery Backup
9V Replaceable Alkaline battery
Alarm Sounder
Piezoelectric Horn
Alarm Sound Level
85dB(A) at 3 meters (min)
Test/Hush Button
Checks sensors, electronics,
interconnection and sounder.
If the unit is in alarm when pressed, it
silences the alarm for 10min
Visual indicators
Green LED – Power supply
Red LED – Memory, alarm (if coincides
with horn sounding) or fault
Operational Life
10 years
Interconnection
Units can be interconnected via a
hardwired or wireless system (using
optional Ei168RC RF base)
Fixings
Supplied with Easi-fit anti-tamper
mounting plate with integral terminal
block and wiring cover, includes screws
and wall plugs
Operating & Storage
Temperature
-10°C to +40°C*
Humidity Range
15% to 95% RH (non-condensing)
* Temperature and Humidity conditions are for normal operation
and storage. The Alarms will function outside these ranges as
required by the specific product standards. Extended exposure
to conditions outside these ranges can reduce product life. For
advice on prolonged operation outside these range consult the
manufacturer.
Important Safety Instructions
WARNING: Mains operated Alarms must be installed and
interconnected by a qualified electrician in accordance with
the local Regulations for Electrical Installations. Failure to
install this Alarm correctly may expose the user to shock or
fire hazards and damage the product.
The Alarm is designed to be permanently mounted, using its own
built-in terminal block to connect it to the mains. The mounting
plate can be screwed directly to the ceiling. Alternatively, it can
be screwed to a standard junction box (BS 4662 single gang
accessory box). The Alarm must not be exposed to dripping or
splashing. There are important markings on the underside of the
Alarm.
To Next Page
Loading...
Need help?
General
