Ei Electronics Ei207 Series User Manual

3
The Ei200MRF RadioLINK
+
Module is the next generation RF module designed
to fit in the Ei208W & Ei208DW CO Alarms. The Ei200MRF RadioLINK
+
Module
is a direct replacement for the Ei200MRF RadioLINK Module, but now with added
features.
The primary function of the Ei200MRF is to interconnect all Ei Electronics Alarms
in a system by the means of an RF signal i.e. when one Alarm senses Carbon
Monoxide (CO), the Ei200MRF module fitted to the CO Alarm will transmit an RF
signal that will activate the sounders in all the other Alarms in the system.
The Ei200MRF module is plugged into the rear of the base of an Ei208W/DW CO
Alarm. RF communication through this module eliminates the need to install long
interconnect wires between all the Alarms on different floors in different rooms. The
Ei200MRF is powered from its own 3V Lithium battery.
The module also has “multiple repeater” transmission – this provides multiple signal
paths to create a robust RF ‘mesh’ system and also increase the RF range.
Introduction

Ei Electronics Ei207 Series Specifications

General

Brand	Ei Electronics
Model	Ei207 Series
Category	Security System
Language	English