28
3.2 Cleaning your Alarm
Clean your Alarm regularly. In dusty areas it may be necessary to clean the Alarm more frequently.
Do not allow cobwebs, dust or grease to accumulate on or near the Alarm.
Use the narrow nozzle attachment of your vacuum cleaner to remove dust, insects and cobwebs from
the sides and cover slots where the airflow enters. Clean the outside cover by occasionally wiping
with a clean damp cloth then dry thoroughly with a lint free cloth. Do not use any cleaning agents,
bleaches, detergents or polishes, including those in aerosol cans.
DO NOT PAINT YOUR ALARM
Other than the cleaning described above, no other customer servicing of this product is required.
Servicing or repairs, when needed, must be performed by the manufacturer.
All Alarms are prone to dust and insect ingress, which can cause false alarms or failure to alarm.
In certain circumstances, even with regular cleaning, contamination can build up in the smoke
sensing chamber causing the Alarm to sound or fail. Contamination is beyond our control, it is
totally unpredictable and is considered normal wear and tear. For this reason, contamination is not
covered by the guarantee.
To Next Page
Loading...
