How to remove the Alarm
Twist off the Alarm
If tamperproofed
Remove Alarm
Twist the head of the Alarm anti-clockwise while
holding the mounting plate with the other hand
With the screwdriver still inserted, twist the head of
the Alarm anti-clockwise
If there is no movement and you cannot get the head
to turn at all, the Alarm may have been
tamperproofed. In this case locate the removal latch
and insert a flat-bladed screwdriver horizontally about
10 mm into the centre of the removal latch
Alarm Removal Latch
The Alarm will then disengage from the mounting
plate. Ensure that you hold the Alarm head at all
times so that it does not fall on the ground
a
b
Twist off the Alarm
To Next Page
Loading...
Need help?
General
