7
The Ei600 series can be easily installed throughout the property on escape routes, on each storey,
in corridors and in closed rooms to give warning of fire without the need of any electrical wiring.
All Alarms in this series are powered by a built-in 10-year Lithium battery which is automatically
connected when the Alarm is fitted to its mounting plate.
The Ei660i Multi-Sensor Fire Alarm is designed with a heat enhanced optical smoke sensor and
automatic dust compensation, delivering a faster response to a wider range of fires. It detects both
smoke and heat from a fire and is ideal for hallway, landing, living room and bedroom areas.
The Ei650i Smoke Alarm has a proven optical sensor and automatic dust compensation delivering
a fast response to smouldering fires. It is ideal for hallway, landing and living room areas.
The Ei630i Heat Alarm, fitted with a Class A1 Heat detection sensor, can only be used as a fire safety
device if interconnected to one or more smoke / Multi-Sensor Fire Alarm(s). It is ideal for kitchens,
garages, boiler houses and other areas where there are normally high level of fumes, smoke or dust
i.e. places where Smoke / Multi-Sensor Fire Alarms cannot be installed without the risk of excessive
nuisance alarms.
Up to 12 Alarms can be wirelessly interconnected by adding an Ei600MRF RadioLINK
+
module.
AudioLINK
+
The Ei600 series Alarms are AudioLINK
+
enabled. This feature allows the user to download information
from the Alarm through the use of a smart phone App. For more information on using this feature,
please refer to the relevant section on www.eielectronics.ie.
To Next Page
Loading...
Need help?
General
