Why does my Eiki EK-500U not save settings after power off?
If your Eiki Projector does not save settings after being powered off, ensure that you have selected 'Store' after adjusting the settings. Certain settings will not be retained unless 'Store' is selected.
What to do if Eiki EK-500U Projector control panel does not function?
If the control panel on your Eiki Projector is not functioning, disable the key lock on the control panel function in the Safety option of the Setup menu.
Why is my Eiki EK-500U Projector image mirror reflected?
If the image on your Eiki Projector is mirror reflected, check the Ceiling and Rear settings.
What to do if Eiki EK-500U auto setting does not work?
If the Auto Setting feature on your Eiki Projector is not working, verify that it is not set to 'Off' in each setup menu. Also, ensure that 'On' is not set in the Ceiling function.
Why does Eiki EK-500U Projector input signal switch automatically?
If your Eiki Projector’s input signal switches automatically (or does not switch), ensure that you have correctly set up the Input Search function.
How to fix Auto PC Adjusting function failure on Eiki EK-500U?
If the Auto PC Adjusting function fails on your Eiki Projector, check the input signal. Note that the Auto PC Adjusting function is unavailable in 480p, 576p, 720p, 480i, 576i, 1080i, or 1080p mode.
General| Brightness | 5000 ANSI Lumens |
|---|---|
| Contrast Ratio | 2000:1 |
| Lamp Life (Normal) | 3000 hours |
| Lamp Life (Eco) | 4000 hours |
| Weight | 7.5 kg |
| Keystone Correction | Vertical ± 30° |
| Speakers | 10W Mono |
| Video Compatibility | NTSC, PAL, SECAM, HDTV |
| Inputs | VGA, Composite Video, S-Video |
| Outputs | VGA, Audio Out |
| Control | RS-232, USB |
To Next Page
