EINHELL GC-EC 2040 User Manual

EN
- 13 -
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Claw stop
2. Front hand guard (chain brake)
3. Front handle
4. Rear handle
5. Safety lock-off
6. On/Off switch
7. Oil tank cap
8. Chain wheel cover
9. Chain tension lock knob
10. Chain tensioning knob
11. Chain oil fi ll level indicator
12. Chain sprocket wheel
13. Power cable
14. Rear hand guard
15. Bar
16. Saw chain
17. Chain saw guard
18. Adapter plate
19. Cable strain-relief clamp
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Original operating instruction with safety
information
3. Intended use
The chain saw is intended for felling small trees
and for cutting trunks, branches, wooden beams,
boards etc. and can be used for cross cuts and
longitudinal cuts. It is not suitable for cutting any
materials other than wood.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Voltage: ..........................................120V ~ 60 Hz
Amperage: ...................................................15 A
No load speed RPM: .................................... 7100
Bar length:....................................................... 16"
Chain pitch: ......................................................⅜ "
Chain Gauge: ...............................................0.05"
Saw chain: ........... Oregon
®
91PJ057X / 57 Teeth
Bar: ..................................Oregon
®
160SDEA041
Cutting speed at rated RPM: ..................610.2 ips
Oil tank capacity: ......................................5.4 fl oz
Weight (Tool only): ......................................11 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Anl_GC_EC_2040_SPK7_NA.indb 13Anl_GC_EC_2040_SPK7_NA.indb 13 28.11.2023 13:11:1628.11.2023 13:11:16

EINHELL GC-EC 2040 Specifications

General

Brand	EINHELL
Model	GC-EC 2040
Category	Chainsaw
Language	English