To Next PageTo Next PageWhy is my EINHELL GC-LC 18 Li T Pole Saw operating intermittently?
If your EINHELL Pole Saw operates intermittently, it could be due to a loose connection or a defective ON/OFF switch. In such cases, it is recommended to consult a specialist workshop.
Details the meaning of various safety symbols used in the manual.
Emphasizes reading and following all safety regulations and instructions.
Identifies the main components and parts of the pole-mounted pruner.
Lists all components and accessories included in the product package.
Highlights potential health risks such as cut injuries, lung damage, and vibration effects.
Provides specifications for noise emissions and vibration values during operation.
Instructions on how to correctly attach and adjust the shoulder strap.
Step-by-step guide for assembling the cutter bar and saw chain.
Details on how to properly tension the saw chain for safe operation.
Guidance for assembling the pole-mounted pruner with or without an extension tube.
Important information regarding the necessity and procedure for chain lubrication.
Procedure for filling the oil tank for the saw chain lubrication system.
Instructions for installing the battery and charging the battery pack.
Explanation of the LED indicators for checking battery charge status.
Guidance on wearing and adjusting the shoulder strap for stable use.
Steps for safely turning the pole-mounted pruner on and off.
Covers chainsaw condition, oil, chain, safety clothing, safe working practices, and cutting techniques.
Information about kick-back phenomenon and how to avoid it.
Specific precautions and warnings for cutting wood that is under tension.
Instructions for cleaning the equipment after use.
Guidance on maintenance, replacing parts, and checking chain lubrication.
Information required for ordering spare parts, including part numbers.
Recommendations for storing the equipment safely and effectively.
Safety measures to prevent damage or injury during equipment transport.
Information on the environmentally friendly disposal and recycling of the product.
General
