What to do if my EINHELL Pole Saw does not work?
If your EINHELL Pole Saw isn't working at all, the issue might be due to an empty battery. Try charging the battery. Alternatively, the battery may not be correctly inserted. In this case, remove the battery and re-insert it properly.
Why does my EINHELL Pole Saw operate intermittently?
If your EINHELL Pole Saw operates intermittently, it could be due to a loose connection (either external or internal) or a defective ON/OFF switch. In any of these cases, it's best to consult a specialist workshop.
Step-by-step guide for fitting the cutter bar and saw chain onto the pole pruner unit.
Details the procedure for adjusting the saw chain tension to ensure safe and efficient cutting.
Guidance on ensuring proper lubrication of the saw chain and cutter bar for optimal performance and longevity.
Methods and best practices for cutting branches of different sizes and under tension.
Explanation of the kick-back phenomenon, its causes, risks, and how to avoid it.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 18 V |
| Weight | 3.5 kg |
| Telescopic | Yes |
| Chain Pitch | 9.525 mm |
To Next Page
