EINHELL GC-SA 1231/1 User Manual

GB
- 13 -
10. Troubleshooting guide
Fault Possible causes Rectifi cation
Motor does not start a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block
defective
d) Connections to motor or
capacitor disconnected
e) Housing clogged
a) Check line and fuse
b) Check
c) Have machine checked by a
customer service center
d) Have machine checked by a
customer service center
e) If necessary adjust working depth.
Clean housing so that the roller can
run freely
Engine performance
drops
a) Soil is too fi rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GC_SA_1231_1_EX_UK_SPK7.indb 13Anl_GC_SA_1231_1_EX_UK_SPK7.indb 13 24.08.2023 10:54:1124.08.2023 10:54:11

EINHELL GC-SA 1231/1 Specifications

General

Power	1200 W
Grass catcher	Yes
Product color	Black, Red
Working width	310 mm
Number of claws	42
Housing material	Plastic
Number of knives	8
Working depth (max)	9 mm
Rear wheels diameter	100 mm
Front wheels diameter	180 mm
Recommended lawn area	300 m²
Collection box capacity	28 L
Number of working depth positions	3
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	600 mm
Width	460 mm
Height	305 mm
Weight	9000 g
Package depth	480 mm
Package height	300 mm
Package weight	11900 g