EasyManuals Logo
Home>EINHELL>Lawn and Garden Equipment>GC-SA 1231/1

EINHELL GC-SA 1231/1 User Manual

EINHELL GC-SA 1231/1
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
GB
- 8 -
l) Uncouple all tools and drive units before you
start the engine;
m) Use the ON/OFF switch with caution,
according to the manufacturer‘s advice. Make
sure that your feet are far enough away from
the tool(s).
n) Do not tilt the equipment when you start
the engine, unless the equipment must be
raised o of the ground a little, in order to
start it. In this case, tilt it as little as absolutely
necessary and only raise the side opposite to
that of the user;
o) Do not start the motor if you are positioned in
front of the chute;
p) Never move your hands or feet toward or
under any rotating parts. Keep clear of the
chute opening at all times;
q) Never lift or carry the equipment with the
engine running.
Maintenance and storage
a) Make sure that all nuts, bolts and screws
are tightened securely to ensure that the
equipment is in safe working condition;
b) Allow the motor to cool before you put the
equipment in an enclosed area;
c) to avoid risk of re, keep the ventilation
openings free of grass, straw, moss, leaves
and similar materials,
d) Make regular checks on the grass collecting
device for wear or damaged parts;
e) Check the equipment at regular intervals and
replace worn or damaged parts for your own
safety.
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. ON/OFF switch
2. Safety lock-o
3. Power cable
4. Cable grip
5. Top push bar
6. Lower push bar
7. Push bar bracket
8. Scarifying depth
9. Grass basket
10. Ejector ap
11. Aerating roller
12. Cable clips
13. Fastening screws for push bar
14. Retaining screws for push bar
2.2 Items supplied
Please check that the article is complete as
speci ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su ocating!
Original operating instructions
Safety instructions
3. Proper use
The equipment can be used both as a scari er
and an aerator depending on the intended use.
Only a few movements are required to change
the roller.
The scarifying roller is designed for ripping moss
and weeds - complete with their roots - out of the
soil and for loosening the soil. As a result your
lawn can absorb nutrients better and is cleaned.
We recommend you to scarify your lawn in the
spring (April) and autumn (October).
The aerating roller scratches the surface of the
lawn, helping water to drain o more easily as
well as promoting oxygen intake. Aerate your lawn
throughout the growing period.
The equipment is intended for private use i.e. for
use in home and gardening environments.
Scari ers for private use are machines whose an-
nual operating time generally does not exceed 10
hours, during which the machine is primarily used
Anl_GC_SA_1231_1_EX_UK_SPK7.indb 8Anl_GC_SA_1231_1_EX_UK_SPK7.indb 8 24.08.2023 10:54:1024.08.2023 10:54:10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL GC-SA 1231/1 and is the answer not in the manual?

EINHELL GC-SA 1231/1 Specifications

General IconGeneral
Power1200 W
Grass catcherYes
Product colorBlack, Red
Working width310 mm
Number of claws42
Housing materialPlastic
Number of knives8
Working depth (max)9 mm
Rear wheels diameter100 mm
Front wheels diameter180 mm
Recommended lawn area300 m²
Collection box capacity28 L
Number of working depth positions3
AC input voltage230 V
AC input frequency50 Hz
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width460 mm
Height305 mm
Weight9000 g
Package depth480 mm
Package height300 mm
Package weight11900 g

Related product manuals