EINHELL GE-SA 1435 User Manual

GB
- 24 -
10. Troubleshooting guide
Fault Possible causes Rectifi cation
Motor does not start a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block
defective
d) Connections to motor or
capacitor disconnected
e) Housing clogged
a) Check line and fuse
b) Check
c) Have machine checked by a
customer service center
d) Have machine checked by a
customer service center
e) If necessary adjust working depth.
Clean housing so that the roller can
run freely
Engine performance
drops
a) Soil is too fi rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GE_SA_1435_SPK7.indb 24Anl_GE_SA_1435_SPK7.indb 24 07.08.14 14:3307.08.14 14:33

EINHELL GE-SA 1435 Specifications

General

Power	1400 W
Working width	350 mm
Recommended lawn area	330 m²
Collection box capacity	28 L
Adjustable working depth	Yes
AC input voltage	230 V
AC input frequency	50 Hz
Package volume	80000 cm³

Weight and Dimensions

Depth	590 mm
Width	425 mm
Height	327 mm
Weight	12500 g
Package weight	14000 g