EINHELL TC-CD 18-2 Li Operating Instructions

GB
- 21 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Drill chuck, Battery
Consumables* Bit inserts/drill bits
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_CD_18_2_Li_SPK7.indb 21Anl_TC_CD_18_2_Li_SPK7.indb 21 07.06.16 08:5707.06.16 08:57

EINHELL TC-CD 18-2 Li Specifications

General

Number of gears	2
Torque settings	19
Sound power level	81.88 dB
Chuck capacity (max)	10 mm
Screw diameter (max)	6 mm
Sound pressure level	70.88 dB
Idle speed (1st gear)	350 RPM
Idle speed (2nd gear)	1250 RPM
Sound level uncertainty	3 dB
Maximum torque (hard applications)	38 N⋅m
Product color	Black, Red
Power source	Battery
Charging time	300 min
Battery voltage	18 V
Battery capacity	1300 Ah
Chuck type	Keyless
Built-in light	Yes
Product design	Pistol grip drill
Number of batteries included	2 pc(s)

Weight and Dimensions

Weight	980 g
Package depth	310 mm
Package width	97 mm
Package height	293 mm
Package weight	2900 g