EINHELL TC-TC 800 User Manual

GB
- 14 -
Danger! Risk of injury through cutting
Caution! Segmented diamond cutting wheels must not be used
Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Anl_TC_TC_800_SPK9.indb 14Anl_TC_TC_800_SPK9.indb 14 14.08.2017 09:42:2214.08.2017 09:42:22

EINHELL TC-TC 800 Specifications

General

Bore size	- mm
Idle speed	2950 RPM
Cord storage	Yes
Maximum power	800 W
Blade diameter	180 mm
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Cutting height @ 45°	14 mm
Cutting height @ 90°	34 mm
Cutting disc swivel angle	45 °
International Protection (IP) code	IPX4
Continuous operating time @ maximum power	10 min

Weight and Dimensions

Depth	445 mm
Width	440 mm
Height	215 mm
Weight	9100 g
Package weight	10500 g