Need help?Do you have a question about the EINHELL TC-TC 800 and is the answer not in the manual?
General| Bore size | - mm |
|---|---|
| Idle speed | 2950 RPM |
| Cord storage | Yes |
| Maximum power | 800 W |
| Blade diameter | 180 mm |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Cutting height @ 45° | 14 mm |
| Cutting height @ 90° | 34 mm |
| Cutting disc swivel angle | 45 ° |
| International Protection (IP) code | IPX4 |
| Continuous operating time @ maximum power | 10 min |
Weight and Dimensions| Depth | 445 mm |
|---|---|
| Width | 440 mm |
| Height | 215 mm |
| Weight | 9100 g |
| Package weight | 10500 g |
To Next Page