EasyManua.ls Logo

EINHELL TE-DH 32 - 3. Proper use; 4. Technical data

EINHELL TE-DH 32
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our
service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing
the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service
information at the end of the operating instructions.
Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport damage.
If possible, please keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts.
There is a danger of swallowing or suffocating!
Demolition hammer
Additional handle
Original operating instructions
Safety instructions
3. Proper use
This machine is designed for heavy duty demolition and chiseling work using the appropriate chisel.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of
this.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent
purposes.
4. Technical data
Mains voltage: ……………………230-240 V ~ 50 Hz
Power input: …………………………………….. 1500 W
Blow rate: ……………………………………… 1900 rpm
Protection class: …………………………………….. II/
Weight: ……………………………………………..10.6 kg
Danger!
Sound and vibration
Sound and vibration values were measured in accordance with EN 60745.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in accordance with EN 60745.

Related product manuals