8.2 Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualified electrician.
Danger! The carbon brushes should not be rep laced by anyone but a qualifi ed electrician.
8.3 Maintenance
There are no parts inside the equipment which require additional maintenance.
8.4 Ordering spare parts
Please provide the following information when ordering spare parts:
Type of unit
Article number of the unit
ID number of the unit
Spare part number of the required spare part
For our latest prices and information please go to www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such
as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a
suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you
should ask in your local council offices.
10. Storage
Store the equipment and accessories in a dark and dry place at above freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the electric tool in its original packaging.
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its
implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an
environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the
owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the
equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any
accessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying
products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
The product meets the requirements of EN 61000-3-11 and is subject to special connection conditions. This
means that use of the product at any freely selectable connection point is not allowed.
Given unfavorable conditions in the power supply the product can cause the voltage to fluctuate temporarily.
The product is intended solely for use at connection points that
a) do not exceed a maximum permitted mains system impedance of Z sys = 0.392 Ω, or
b) have a continuous current-carrying capacity of the mains of at least 100 A per phase.
To Next Page
Loading...
