EINHELL TE-TC 920 UL User Manual

GB
- 19 -
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Danger! Risk of injury through cutting
Caution! Segmented diamond cutting wheels must not be used
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Wear gloves.
Anl_TE_TC_920_UL_SPK7.indb 19Anl_TE_TC_920_UL_SPK7.indb 19 02.12.2020 09:52:5902.12.2020 09:52:59

EINHELL TE-TC 920 UL Specifications

General

Input power	900 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Idle speed (max)	2950 RPM
Cutting depth (45º)	29 mm
Cutting depth (90º)	-, 36 mm
Cutting height @ 90°	36 mm
Diamond disc	Yes
Diamond disc diameter	200 mm
Diamond disc bore size	25.4 mm
Saw blade included	-
Product color	Red, Stainless steel

Weight and Dimensions

Depth	1328 mm
Width	566 mm
Height	461 mm
Weight	42700 g
Package weight	49550 g