EINHELL TE-TC 920 UL User Manual

GB
- 27 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts*
Consumables* Cutting wheel
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com.
Please ensure that you provide a precise description of the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TE_TC_920_UL_SPK7.indb 27Anl_TE_TC_920_UL_SPK7.indb 27 02.12.2020 09:53:0002.12.2020 09:53:00

EINHELL TE-TC 920 UL Specifications

General

Input power	900 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Idle speed (max)	2950 RPM
Cutting depth (45º)	29 mm
Cutting depth (90º)	-, 36 mm
Cutting height @ 90°	36 mm
Diamond disc	Yes
Diamond disc diameter	200 mm
Diamond disc bore size	25.4 mm
Saw blade included	-
Product color	Red, Stainless steel

Weight and Dimensions

Depth	1328 mm
Width	566 mm
Height	461 mm
Weight	42700 g
Package weight	49550 g