To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TP-CC 10 T and is the answer not in the manual?
Essential safety rules for operating the equipment.
Understanding the meaning of various symbols used in the manual.
Identification of all parts of the bench-type circular saw.
Checking all components are present upon delivery.
Guidelines for correct application and what to avoid.
Detailed data regarding power, dimensions, and performance.
Measured sound pressure and power levels of the equipment.
Important safety steps before commencing assembly.
Placing and securing the machine on a stable surface.
Preparing the saw for transport and storing loose parts.
Procedures for replacing the table insert.
Correctly positioning the splitter for safe operation.
Installing the safety blade guard.
Steps for safely replacing the saw blade.
How to connect a vacuum for dust removal.
How to start and stop the saw.
Setting the blade height for various cuts.
Mounting the parallel stop in different positions.
Adjusting the stop rail for workpiece support.
Adjusting the guide rail for desired cut width.
Adjusting the parallel stop's clamping lever.
Methods for making cross cuts with slide or stop.
Adjusting the saw blade angle for bevel cuts.
Performing rip cuts along the wood grain.
Performing bevel and cross cuts.
Instructions for cleaning and basic upkeep.
Proper methods for disposing of the equipment.
How to contact service partners for support.
Explains the guarantee coverage and limitations.
General