To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TP-CS 18/190 Li BL and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Battery Voltage | 18 V |
| Blade Diameter | 190 mm |
| Cutting Depth | 65 mm |
| No-Load Speed | 5000 min^-1 |
| Weight | 3.5 kg |
| Saw blade bore | 30 mm |
| Cutting depth at 90° | 65 mm |
| Cutting depth at 45° | 45 mm |
| Battery Type | Li-Ion |
| Max Cutting Depth | 65 mm |
Read operating instructions to reduce the risk of injury.
Wear ear-muffs as noise can cause hearing damage.
Wear a breathing mask to avoid inhaling harmful dust.
Wear safety goggles to protect against sparks and debris.
Store batteries in dry rooms between +10°C and +40°C.
Refers to mains and battery operated power tools for safety regulations.
Keep work area clean, avoid explosive atmospheres, keep bystanders away.
Proper plug use, avoid contact with grounded surfaces, protect from rain/wet.
Stay alert, use PPE, prevent unintentional starting, remove tools.
Safe handling of batteries, avoiding damage, and proper charging.
Instructions for safe use of battery chargers and the charging procedure.
Precautions against overheating, damage, and fire risks with batteries.
Guidelines for environmentally safe disposal of appliances and battery packs.
Explains kickback and how to prevent it through proper grip and technique.
Identifies all parts of the circular saw with numbered labels.
Verifies completeness of delivered items and checks for transport damage.
Adjusts the saw blade depth relative to the workpiece thickness.
Adjusts the cutting angle for bevel cuts up to 45 degrees.
Connects a vacuum cleaner for effective dust removal during operation.
Attaches the edge guide for making straight parallel cuts.
Uses the line guide for precise cuts along marked lines on the workpiece.
Proper handling, force application, and workpiece support for safe sawing.
Procedures for safely starting and stopping the circular saw.
Step-by-step guide to safely replace the saw blade.
Explains the LED lamp for illuminating the cutting position in low light.
Instructions for charging the Lithium-Ion battery pack.
Shows how to check the battery charge level using LEDs.
Guidelines for environmentally responsible disposal of the tool.
Proper storage conditions for the tool and accessories to maintain their condition.
