To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-CS 1410 and is the answer not in the manual?
General| Dust blower | Yes |
|---|---|
| Product color | Red |
| Built-in light | No |
| Suitable for materials | Wood |
| Blade diameter | 190 mm |
| Number of teeth | 24 |
| Idle speed (max) | 5500 RPM |
| Cutting depth (45º) | 46 mm |
| Cutting depth (90º) | 67 mm |
| Input power | 1410 W |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Weight | 4330 g |
|---|---|
| Package depth | 270 mm |
| Package width | 360 mm |
| Package height | 290 mm |
| Package weight | 5450 g |
Guidelines for maintaining a clean, well-lit, and hazard-free work area.
Precautions to prevent electric shock, including proper grounding and cable use.
Instructions on how to correctly hold, balance, and operate the tool safely.
Precautions and best practices for performing safe sawing operations.
Understanding and preventing kickback by following specific safety measures.
Ensuring the proper operation and safety of the bottom guard hood mechanism.
Proper use and adjustment of the saw splitter for enhanced safety.
Identification of all parts and components of the circular saw.
List of accessories and parts provided with the circular saw.
Specifies the correct applications and materials for the circular saw.
Information on noise and vibration levels measured according to standards.
Instructions for adjusting the saw's cutting depth for various materials.
Guidance on adjusting the saw's angle for miter cuts up to 45 degrees.
Essential techniques for safely and effectively operating the circular saw.
Steps for preparing and starting the circular saw for cutting operations.
How to safely turn the circular saw on and off using the switch mechanism.
Step-by-step guide for safely removing and installing a new saw blade.
Guidelines for keeping the saw clean and ensuring proper maintenance.
Details needed when ordering replacement parts or accessories.
