7
Call transfer
This function is only accessible when two
handsets or more are registered to the same
base. You can now transfer the call in
progress to another hand set.
During communication, press Menu .
Select INTERNAL CALL using or .
Press Valid. .
Select the handset you want to call using
or . Press Call .
The handset called rings, once someone
picks up transfer the call by pressing the red
key .
To retake the call before it is picked up by the
handset called, press Menu .
Select HANGING UP using or . Press
Valid. .
During a call
During a call, you can receive a second
incoming call or place a call to a second
contact. You can then switch from one
contact to the other.
You may also set a three party conference if
the second call has been set from your
terminal (depending on your subscription).
Receiving a second call whilst on line
During the call, a beep is transmitted to your
telephone by your service provider to let you
know that you have a second call waiting.
Press ACCEPT to take this new call.
Your other caller is then put on hold and you
can talk with your second caller.
Making a second call whilst on line.
During a call, you can put your contact on
hold and call a second one by pressing
Menu .
Select SECOND CALL using or . Press
Valid. .
Select your contact's telephone number in
the phonebook by pressing and press
Valid. or dial the number using the
keypad and press Call .
The second call is then launched, with the
first call still on hold.
To alternate from one call to the other
Press Menu .
Select SWITCH using or . Press
Valid. .
The call in progress is put on hold, and you
can then take the second call.
GETTING STARTED
LU Eircom 8010R_D66.book Page 7 Vendredi, 28. novembre 2008 10:05 10
To Next Page
Loading...
