Eircom 8010R - Settings; Programming a Key; Modifying the Date and Time

28
SETTINGS
SETTINGS
This menu enables you to change
or customise the handset and base
parameters.
Programming a key
This function enables you to programme the
and keys on your handset giving
you direct access to certain functions right
from the idle screen.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select PROGRAM KEYS using  or .
Press Valid. .
A screen presents the function currently
assigned the key.
• To keep the function, press Valid. .
• To modify the function, press Edit .
Choose from the function list the function you
want to assign to the key. Press
 or  to
select one of the following functions:
Press Valid. .
• SILENCE • KEY LOCK
• ALARM • NUMBER
•TIMER •REDIAL
With the number function, you
associate a telephone number to a
program key. You can thus quickly
call your contact.
Once the key is programmed, a screen
invites you to programme the key .
• To modify the function, press Edit .
• To keep the function, press Valid. .
To exit the menu, press the red key .
Modifying the date and time
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select DATE/TIME using  or . Press
Valid. .
A screen displays the current date.
Enter the date in DD/MM/YY format and
press Valid. .
A screen displays the current time.
Enter the time in HH/ MM format and press
Valid. .
To exit the menu, press the red key .
If you programm the function
"Number" to the two softkeys, each
number will be programmed
separatly.
LU Eircom 8010R_D66.book Page 28 Vendredi, 28. novembre 2008 10:05 10