Eircom 8010R - Modifying the Language

30
SETTINGS
The number of your voice messaging service
is set in the factory. To change this number,
proceed as follows:
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select VOICE BOX No using  or . Press
Valid. .
The programmed number is displayed on the
screen,
• The number is correct, press
Valid. .
• To modify the number, press Edit .
Delete the numbers using the navigator
C key. Enter the number. Press Valid. .
To exit the menu, press the red key .
Modifying the language
This function enables you to change the
screen display language.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select LANGUAGE using  or . Press
Valid. .
An information screen presents the current
language used.
• To keep the setting, press Valid. .
• To change the setting, press Edit .
Choose the desired language from the
language list. Press  or  to select the
language. Press Valid. .
The screen shows the new language used.
Press Valid. .
To exit the menu, press the red key .
LU Eircom 8010R_D66.book Page 30 Vendredi, 28. novembre 2008 10:05 10