Eircom 8010R - Handset Customization Options

22
CUSTOMISING THE HANDSET
CUSTOMISING THE
HANDSET
This menu allows you to modify the ring
tones and the visual interface of the handset,
and particularly:
• to assign different ring tones for incoming
calls outsides or intercom (between
handsets),
• to change the idle screen picture,
• to change the menu background colour,
• to activate or deactivate tones being
sounded when pressing the keypad
or when validating the settings
information of your handset.
• activate or deactivate silent mode.
Changing the ring tones
This menu enables you to associate a unique
ring tone to incoming calls or internal calls
(intercom).
On the navigator key , press  or 
until the PERSONALIS. screen is displayed,
press OK to confirm.
Select RING TONE using  or . Press
Valid. .
Select EXTERNAL CALL or INTERNAL
CALL using  or . Press Valid. .
Select the ring tone of your choice using
the or  keys then press Volume .
Adjust the ringer volume using  or , press
Valid. .
To exit the menu, press the red key .
Activating or deactivating the beeps
On the navigator key , press  or 
until the PERSONALIS. screen is displayed,
press OK to confirm.
Select RING TONE using  or . Press
Valid. .
Select BEEPS using  or . Press
Valid. .
Select the beep type using  or  . Press
Valid. .
KEYTONE: the handset beeps when a key is
pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
CHARGER: the handset beeps when you
hang up the handset.
An information screen displays the beep
status for the selected item (Active
or Inactive).
• To change the status, press Edit .
The status is modified on the screen.
Press Valid. .
• To keep the status, press Valid. .
To exit the menu, press the red key .
LU Eircom 8010R_D66.book Page 22 Vendredi, 28. novembre 2008 10:05 10