Eircom 8010R - Renaming the Base; Advanced Settings; Line Settings; Modifying the Network Type

35
SETTINGS
Renaming the base
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using  or .
Press Valid. .
Select SET BASE. Press Valid. .
Select RENAME BASE using  or . Press
Valid. .
Select the base for which you want to modify
the name
using  or  . Press Valid. .
Enter the new name using the keypad. Press
Valid. .
To exit the menu, press the red key .
ADVANCED SETTINGS /
LINE SETTINGS
Modifying the network type
Your DECT telephone can be installed on a
public or private network (when using a
PABX).
This function enables you to configure your
telephone according to the type of network.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using  or .
Press Valid. .
Select SET LINE using  or . Press
Valid. .
Select NETWORK TYPE using  or .
Press Valid. .
A screen presents the current status (public
or private).
• To keep the status, press Valid. .
• To change the status, press Edit .
The status is modified on the screen,
press Valid. .
Before changing the settings of the
telephone line, contact your operator
to obtain the parameters for your
line.
LU Eircom 8010R_D66.book Page 35 Vendredi, 28. novembre 2008 10:05 10