Changing the default code
Enter the old and then the new code and confirm.
Menu > SETTINGS > ADVANCED SET. > CHANGE CODE
Allow/Prevent the sharing of a call with another
handset
Follow the instructions on the screen and confirm.
Menu > SETTINGS > ADVANCED SET. > SET BASE > INTRUSION
Notes If you disable the intrusion mode, you will not be able to share a
call in process with another handset.
Associating a new handset
Your phone allows you to associate other handsets with the base. You then have to
page/pair them so that they are recognized.
FROM THE HANDSET:
1 Enable the function.
FROM THE BASE:
2 Enabling the paging mode.
Refer to section “Enabling the paging mode”, page 41.
Once the handset is registered, the paging mode is automatically exited.
Menu > SETTINGS > ADVANCED SET. > SET HANDSET > REGISTRATION
To Next Page
Loading...
