Eircom 9000 - Line Settings

43
The line
IMPORTANT We do not recommend that you change line settings without first
contacting your operator, as this may result in your phone line
being disconnected.
Changing the network type
You can connect your phone to a public or private network.
Follow the instructions on the screen and confirm.
Menu > SETTINGS > ADVANCED SET. > SET LINE > NETWORK TYPE >
PRIVATE or PUBLIC
Changing the dialling type
You can use a voice frequency or pulse based dialling system.
Follow the instructions on the screen and confirm.
Menu > SETTINGS > ADVANCED SET. > SET LINE > DIAL > TONE or PULSE
Changing the flash duration
You can configure the flash duration if you use your phone abroad or on a private
network.
For further details, refer to section “ Changing the network type”, page 43 . .
Follow the instructions on the screen and confirm.
Menu > SETTINGS > ADVANCED SET. > SET LINE > FLASHING > 80 MS to 600 MS