7 | Avoset Quick Guide
Insert Batteries
Always turn off the pump before inserting or replacing batteries.
1. Press down the battery cover
latch to open it
2. Insert 3 AA (1.5V) batteries according the diagram in the battery
compartment. Slide the negative (-) end rst, compress the spring
and snap the positive (+) end into place
3. Close the battery cover
Warning
• Change batteries before each treatment.
• Use 3 AA alkaline or rechargeable batteries
• Have extra 3 fresh batteries available during treatment.
• Check the list of supported batteries at eitanmedical.com, as this list may be updated.
To Next Page
Loading...
